- You do not have any products in your shopping cart yet.
Wharfedale PRO DP-4100N, 4-channel PA-Amplifier
Wharfedale PRO DP-4100N, 4-channel PA-Amplifier with DSP, FIR and DANTE.
[4x1000 W (8 Ohms) / 4x1700 W (4 Ohms) / 4x2890 W (2 Ohms) / 2 x 3400 W (8 Ohm Bridged) / 2 x 5780 W (4 Ohm Bridged)]
Description
DP-N 4100
- 4 channels
- 8 Ohm 4 x 1000 W
- 4 Ohm 4 x 1700 W
- 2 Ohm 4 x 2890 W
- 16 Ohm Bridged 2 x 2000 W
- 8 Ohm Bridged 2 x 3400 W
- 4 Ohm Bridged 2 x 5780 W
- 100 V Hi-Z : No
- 70 V Hi-Z 4 x 1700 W
DP-N Series
- Huge Class D power in a 1U rack
- 4 discrete amplification channels
- Internal DSP and computer control
- Stable down to 2 Ω. Drive multiple speakers or line array elements
- FIR filtering with 512 taps
- 90 V to 260 V AC working voltage
- Dante ™ connectivity
- 70 V compatible
TAKE CONTROL
Harnessing the power of the internal DSP
The supplied editing software gives a practical overview of all system parameters and DSP features within the DP-N amplifier.
It is simple to monitor and edit the DP-N remotely.
REDUNDANCY
DP series amps get used in ‘mission critical’ environments. Therefore the ‘auto’ mode has been built in to deliver redundancy capability.
Set the input to ‘Auto’ and the input will change, should a problem happen with external connections.
(Use of an internal delay is advised to compensate for any switch timing and latency issues)
FIR FILTERS
FIR Filtering gives
- Independent control of magnitude and phase.
- More detailed equalisation.
- Optimization of frequency and power response.
STABLE DOWN TO 2 OHMS
Huge output power and stable down to 2 Ohms
The power output figures of DP-N series are staggering.The rated power outputs are measured at THD = 1%, continuous sinusoidal 1 KHz with each channel working simultaneously.
DP-N amps are also stable down to 2 Ohms. This allows for multiple 8 Ω or 16 Ω speakers to be driven with extreme power.
DANTE ™
Using the Ultimo 4×4 chipset, DP-N amps easily join any Dante ™ ecosystem.
- Digital audio connectivity of up to 96 KHz
- Remote, network control.
Dante® is a registered trademark of Audinate Pty Ltd.
SPECIFICATIONS
| Model | DP-2200N | DP-4100N | DP-4065N | DP-4035N | |
|---|---|---|---|---|---|
| Rated Power (THD=1%,Each channel works simultaneously with continuous sinusoidal 1 kHz) | 8 Ω / Stereo | 2 x 2000 W | 4 x 1000 W | 4 x 650 W | 4 x 350 W |
| 4 Ω / Stereo | 2 x 3400 W | 4 x 1700 W | 4 x 1100 W | 4 x 595 W | |
| 2 Ω / Stereo | 2 x 4760 W | 4 x 2890 W | 4 x 1870 W | 4 x 1010 W | |
| 16 Ω / Bridge | 1 x 4000 W | 2 x 2000 W | 2 x 1300 W | 2 x 700 W | |
| 8 Ω / Bridge | 1 x 6800 W | 2 x 3400 W | 2 x 2200 W | 2 x 595 W | |
| 4 Ω / Bridge | 1 x 9520 W | 2 x 5780 W | 2 x 3740 W | 2 x 2020 W | |
| 100 V Hi-Z | 2 x 3400 W | – | – | – | |
| 70 V Hi-Z | 2 x 2400 W | 4 x 1700 W | 4 x 1100 W | – | |
| Output RMS voltage | 126.5 V | 89.4 V | 72.1 V | 52.9 V | |
| Maximum Input Level | 8.7 Vrms(+21 dBu)(Default Gain) | ||||
| Default Gain (Rated Power,1 kHz) | 24 dB | 21 dB | 19 dB | 17 dB | |
| Gain(Rated Power,1 kHz) | 24 dB~42 dB | 21 dB~39 dB | 19 dB~37 dB | 17 dB~35 dB | |
| THD+N | Typical value:0.05%(10% Rated Power,8 Ω) | ||||
| Cross-Talk | ≥90 dB(20 Hz-1 kHz,Below Rated Power,8 Ω) | ||||
| Frequency Response | Typical value:+0,-0.5 dB(10% Rated Power,20 Hz-20 kHz,8 Ω) | ||||
| Input Impedance | 20 kΩ(Balance),10 kΩ(Unbalance) | ||||
| Damping Factor | ≥1000(20 Hz-200 Hz,8 Ω) | ||||
| SNR | ≥105 dB (Default Gain, A weighted,20 Hz-20 KHz,8 Ω) | ||||
| Main Power | 90~260 VAC,50/60 Hz | ||||
| Protection | Power under-voltage protection、Amplifier output DC protection、Thermal Protection、 Temperature Power Control、Overload Power Control | ||||
| Size(W×H×D) | 483 x 45 x 376 mm | ||||
| Net Weight | 9.3 kg | 9.1 kg | 9.1 kg | 8.0 kg | |
Customer reviews
Unfortunately there are no review yet. Be the first who rate this product.
For more information, please visit the home page for this product.