- You do not have any products in your shopping cart yet.
SME M2-12R Tonearm
.jpg "SME Limited")
SME M2-12R Tonearm, High-End Pick-Up Arm.
Description
The Model M2-12R precision pick-up arm is an extension of our popular Series M2 range offering optimum cartridge choice with minimal tracking error and harmonic distortion associated with a 12 inch arm.
Providing classic looks and meticulous build quality, This arm offers all the most important features, traditional 'J' shaped tone-arm, detachable S2-R aluminium headshell with azimuth adjustment, two stage tungsten counterbalance system, superb quality ball race bearings and a level of rigidity to suit all types of cartridge.
Providing classic looks and meticulous build quality, This arm offers all the most important features, traditional 'J' shaped tone-arm, detachable S2-R aluminium headshell with azimuth adjustment, two stage tungsten counterbalance system, superb quality ball race bearings and a level of rigidity to suit all types of cartridge.
Features
- The 12in construction with thin walled stainless steel tone-arm takes advantage of the reduction in maximum tracking error/distortion afforded by the greater arm length when compared with 9in models.
- S2-R Aluminum shell detachable and interchangeable without disturbing cartridge or wiring.
- Double draw-in pin bayonet fitting design ensures a rigid junction with the tone-arm.
- Unique headshell to tone-arm coupling readily allows cartridge azimuth adjustment.
- Internal constrained layer damps minute residual vibrations making tone-arm acoustically inert.
- Stainless steel cross shaft, ground and thread ground. Carried in a substantial yoke on 10mm precision ball races.
- Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke.
- 23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm precision ball races, widely spaced to resist tilt.
- Anti-skate control operates through Anti-Skate weight and filament, adjustable up to 5g VTF.
- Lowering/raising control gives smooth positive action. Height of lift can be adjusted.
- Thumbwheel (Vertical tracking angle VTA) height adjustment.
- Bedplate affords +/- 12.0mm movement to facilitate (Horizontal tracking angle HTA) adjustment.
- Base slides on bedplate for horizontal tracking adjustment with double null-point protractor.
- Tungsten-alloy balance weight inserts allow maximum centre of gravity shift to balance a greater range of cartridges up to 38g in S2-R headshell and direct plug-in heads up to 46g.
- Precise vertical tracking force up to 5g applied in 0,5g increments via rider weight and graduated wayrod.
- Fluid damper FD-M2 is available as an optional extra.
- Alignment protractor designed to provide HTA settings with the greatest accuracy.
- Internal wiring in LCOFC.
- Balanced Hybrid Cable 1.2M audio lead with gold plated phono plugs.
| DIMENSIONS | SPECIFICATIONS | |||
| A - Distance from pivot to stylus | 308.81mm | Effective Mass | 18.0g | |
| B - Distance from pivot to turntable centre | 295.60mm | Cartridge balance range: | ||
| C - Cartridge fixing centres | 12.70mm | In S2-R headshell: up to | 38.0g | |
| D - Offset angle | 17.62º | Plug-in heads: up to | 46.0g | |
| E - Linear offset | 93.47mm | Vertical tracking force VTF: up to | 5.0g | |
| F - Overhang | 13.21mm | Maximum tracking error | 0.01º/mm | |
| G - Height above mounting surface | 87.00mm max | Null points: Inner radius | 66.04mm | |
| 63.00mm min | Outer radius | 120.90mm | ||
| H - Mounting surface to underside of headshell | 69.75mm max | Weight: net | 834.0g | |
| 45.75mm min | Audio Lead: | |||
| J - Depth below mounting surface | 46.00mm | 1.2m balanced hybrid cable with gold plated connectors | ||
| K - Balance weight radial clearance | 85.00mm | |||
Customer reviews
Unfortunately there are no review yet. Be the first who rate this product.
For more information, please visit the home page for this product.