ROKSAN K2 Vollverstaerker
1.100,00 EUR
(inkl. 19% MwSt.)
Artikeldatenblatt drucken
Art.Nr.: 043777
Lieferzeit:
ca. 1 Woche
Weiterempfehlen
ROKSAN - K2, Kandy Linie Integrated Amplifier.
Philosophy
ROKSAN - K2, Kandy Linie Integrated Amplifier.
K2 integrated is designed and refined to what would be expected of amplifiers classified as hi-end and costing twice its price. The new K2 sounds far more accurate, more delicate and even more powerful than its award winning predecessor the Kandy L.III. True dynamics and musical capabilities of the K2 enhance the enjoyment and provide insight to all types of music. The sound stage and musicians have the realistic ‘sound’ and ‘air’ about them that is achieved by the highest class amplifiers around.
Thanks to its superior design and use of highest quality components, the K2 sets a new standard for true hi-end entry level amplification. The new K2 integrated benefits from totally revised amplifier internals. The mains transformer and amplifier’s 3 AC/DC circuitry are now separated and moved to two sides away from the pre and amplifier main circuits thus dramatically reducing noise interference. After rectification circuitry, the power supply layout, distribution and tracking to different sections of the amplifier have been optimised and internal wiring minimised to ensure all sections work at their best.
Features
-
New look chassis, front panel and display
-
New one piece Main amplifier PCB
-
New improved high quality signal input relays
-
Optimised volume control position on main amplifier PCB
-
New optimised one piece display PCB with headphone output socket
-
Symmetrical amplifier layout
-
Optimised power supply layout, distribution and decoupling
-
Improved decoupling and power regulation to all stages
-
Improved power supply and grounding for Preamplifier and phono section
-
New Op-amps, audio and power supply circuits and layouts
-
Directly powered power amp section from the main power supply
-
Optimised routing and no internal low level signal cables
-
New switch-able Bypass input
-
Improved wideband noise rejection
-
Redesigned chassis and cover with improved ventilation
-
New custom made, programmable learning system remote handset with back light
Specifications
| Inputs |
Line Level (x5), Moving Magnet (x1), Tape (x1), Bypass (x1) |
| Input Impedance |
47 kΩ |
| Input Sensitivity (70W) |
(120W) Line 470mV |
| Line Outputs |
Tape, Preamplifier (x2) |
| Output Voltage |
240mV (Tape Out)
700mV (Pre Out) |
| Power Outputs |
Loudspeaker, L & R |
| Output Power |
>125 Watts, into 8 Ohms
both channels driven
>190 Watts, into 4 Ohms
both channels driven |
| Power Supply |
500VA Ultra Low Noise Toroidal Transformer
4 Regulated Supply Rails |
| Current Output |
50 Amps Peak to Peak |
| Damping Factor |
>110 (8 Ohms) |
| Frequency Response |
(-3dB), <3Hz – >100kHz |
| Gain |
37.3dB Overall (Pre & Power)
5.7dB Preamplifier
31.6dB Power Amplifier |
| Harmonic Distortion |
<0.005% 1kHz - 8 Ohms |
| Signal to Noise Ratio |
100dBa (ref 470mV) |
| Power Source |
100V – 120V 50Hz / 60Hz
220V – 240V 50Hz / 60Hz |
| Power Consumption StandBy |
<25W, Full Power 2-CH 8Ohms< 330 W, 4Ohms<550W |
| Dimension |
432 x 380 x 90 (W x D x H) mm
432 x 380 x 102 (including feet) |
| Weight |
14 Kg |
| All specifications are liable to change without notice. E.& O.E |
Versandgewicht je Stück: 18 kg
.jpg "Sofortüberweisung")
Neue Artikel
